Create a plan in Ordway to group products and charges that can be added to customer subscriptions. Define the plan's basic information, add one or more charges, and configure charge types, pricing models, billing settings, and accounting information.
Contents
- Prerequisites
- Create a Plan
- Add Charges to a Plan
- Configure Charge Types
- Configure Pricing Models
- Configure Accounting Information
- Save the Plan
Prerequisites
Before creating a plan, verify the following:
- The products to be included in the plan are already created and active.
- Enable Plans is active in Menu > Setup > Settings.
Create a Plan
- Navigate to Menu > Products and Plans > Plans and Charges.
- Click Add in the upper-right corner.
- On the Add Plan page, review the Plan ID. Ordway generates this ID automatically.
-
Configure the following information:
Field Description Plan ID Automatically generated by Ordway. Status Enable the toggle to set the plan to Active. An active plan is available for use. Plan Name Enter a name to identify the plan when adding it to subscriptions. This field is required. Description Enter additional information about the plan, if needed. - Proceed to the Charges section to add charges to the plan.
Add Charges to a Plan
Add charges to define the products, pricing, and billing information included in the plan.
- In the Charges section, click Add Charge.
-
In the Add Charge form, configure the Basic Information fields.
Field Description Charge ID Automatically generated by Ordway. Product Select the product to associate with the charge. This field is required. Name Enter a name for the charge. This field is required. Description Enter additional information about the charge, if needed. - Populate any applicable fields in the Custom Fields section. The available fields depend on the configured custom fields.
- Open the Billing Information section and configure the charge type, pricing model, and applicable billing fields.
- Configure the Accounting Information section, if applicable.
- Configure the Pricing Tiers section when available and applicable to the selected pricing model.
- Click Save to save the charge.
- Repeat these steps to add additional charges to the plan.
Note: Charges can be edited at the subscription level. Changing a charge's price after adding the plan to a subscription does not change the price on the original plan.
Configure Charge Types
Ordway supports the following charge types:
The available billing fields depend on the selected charge type.
One-Time Charge
Use a one-time charge for fees that occur once, such as setup or initiation fees.
- Select One-Time as the Charge Type.
- Select the applicable Pricing Model.
- Select the Charge Timing:
- Initial: For fees that occur at the start of a contract, such as setup or initiation fees.
- Termination: For cancellation charges when a subscription is canceled before the end of its term.
-
Select the Charge Billing Date to determine when the charge goes into effect.
Option Description Contract Effective Date The date the contract becomes effective. This date can differ from the service start date. Service Start Date The date the first service period begins and the service starts. Billing Start Date The date billing starts. This date can differ from the service start date, such as when a free trial is offered. Example: For a one-month free trial beginning February 1, the service period before the Billing Start Date can be represented by a $0.00 charge with a 100% discount applied.
- Enter the List Price.
- Configure the following cancellation options, if applicable:
- Refund Units on Cancel: Credits invoiced billing schedule lines when a cancellation occurs. A refund is issued only for invoiced lines.
- Remove Lines on Cancel: Deletes un-invoiced billing schedule lines when a cancellation occurs.
- Click Save.
Note: Removing charges as part of a subscription change is considered a cancellation for these options.
Recurring Charge
Use a recurring charge for charges billed repeatedly according to a billing schedule.
- Select Recurring as the Charge Type.
- Select the applicable Pricing Model.
- Enter the List Price and select the applicable recurrence unit:
- Billing Period
- Day
- Week
- Month
- Select the Billing Period. Available billing periods are configured in Menu > Setup > Billing > Billing Periods.
- Configure Prepaid Periods by entering the number of periods that require prepayment before the contract start date.
-
Configure Billing Period Start Alignment.
Option Description Service Start Date Starts the billing period on the service start date. Customer's Billing Cycle Day Aligns service periods with the customer's billing cycle day. Specific Day of Month Aligns service periods to a specified day of the month. If the customer starts service on another day, the first month is billed as a partial month. -
Configure Billing Day to determine when the customer is billed.
Option Description Customer's Billing Cycle Day Uses the customer's billing cycle day. Align with Billing Period Aligns the billing date with the billing period. For advance billing, the billing date is the first day of the period. For arrears billing, it is the first day after the period ends. Specific Day of Month Uses a specified day of the month for billing. - Configure Proration Rules to determine how partial billing periods are handled. When proration is enabled, the first partial period can be billed at a prorated amount. When disabled, billing does not start until the first day of the first full period.
- Select Charge Timing:
- In Advance: The charge-ready date occurs before the billing period starts.
- In Arrears: The charge-ready date occurs after the billing period ends.
- Click Save.
Usage-Based Charge
Use a usage-based charge to bill customers according to measured usage.
- Select Usage Based as the Charge Type.
- Select the applicable Pricing Model.
- Select the Unit of Measure. Available units are managed in Menu > Setup > Billing > Manage Units of Measure.
- Enter the List Price for each unit of measure.
- Select Billing Period Frequency to define the period over which usage is measured. Available periods can include weekly, monthly, quarterly, and annually. Custom periods are managed in Menu > Setup > Billing Periods.
- Configure Billing Day using one of the following options:
- Customer's Billing Cycle Day: Uses the customer's billing cycle day.
- Align with Billing Period: Aligns billing with the billing period. For advance billing, the billing date is the first day of the period. For arrears billing, it is the first day after the period ends.
- Specific Day of Month: Uses a specified day of the month for billing.
- Configure Proration Rules, if applicable, to determine how partial periods are billed.
-
Configure Billing Period Start Alignment.
Option Description Service Start Date Starts the billing period on the service start date. Customer's Billing Cycle Day Aligns service periods with the customer's billing cycle day. Specific Day of Month Aligns service periods to a specified day of the month. - Enter Included Units to specify the number of units included at no charge.
- Enable Enable Prepaid Units and enter the number of units that require prepayment before the contract start date, if applicable.
- Click Save.
Configure Pricing Models
The pricing model determines how a charge is priced. The available pricing models depend on the selected charge type.
Per Unit Pricing
With Per Unit pricing, all units have the same price per unit.
- Select the applicable Charge Type.
- Select Per Unit as the Pricing Model.
- Configure the applicable charge timing and charge billing date, when available.
- Enter the List Price.
- Configure Refund Units on Cancel and Remove Lines on Cancel, if applicable.
- Open the Accounting Information tab.
- Configure the accounting information, if needed.
- Click Save.
Volume Pricing
With Volume pricing, configure pricing tiers to define the applicable unit ranges and prices. Each pricing tier is independent of the others.
- Select the applicable Charge Type.
- Select Volume as the Pricing Model.
- Configure the applicable charge billing date and billing information.
- Configure Refund Units on Cancel and Remove Lines on Cancel, if applicable.
- Open the Accounting Information tab and configure the accounting information, if needed.
- Open the Pricing Tiers tab.
- Enter the number of units and the corresponding Price.
- Select the applicable Type from the available options.
- Click + Add Row to add another pricing tier, if needed.
- Click Save.
Tiered Pricing
With Tiered pricing, configure pricing tiers for the charge.
- Select the applicable Charge Type.
- Select Tiered as the Pricing Model.
- Configure the applicable charge timing, charge billing date, and billing information.
- Enter the List Price, when available.
- Configure Refund Units on Cancel and Remove Lines on Cancel, if applicable.
- Open the Accounting Information tab and configure the accounting information, if needed.
- Open the Pricing Tiers tab.
- Enter the number of units and the corresponding Price.
- Select the applicable Type from the available options.
- Click + Add Row to add another pricing tier, if needed.
- Click Save.
Note: Pricing tiers are calculated to two decimal places. The ending value of each tier is inclusive, and the starting value of each subsequent tier is derived from the ending value of the previous tier.
Pre-rated Pricing
The Usage Based charge configuration also displays Pre-rated as a Pricing Model option.
The configuration and calculation behavior for this pricing model are not covered in the available source material. Additional product confirmation is required before publishing detailed instructions for this option.
Configure Accounting Information
The Accounting Information tab allows accounting settings to be inherited from the associated product or adjusted at the charge level.
- Open the Accounting Information tab.
- Review the Use Default From Product setting.
- When Use Default From Product is enabled, the accounting information is retrieved from the product level.
- Disable Use Default From Product to adjust the accounting information at the charge level.
- Review the available accounting information, including:
- Revenue Rule
- Recognition Start Date
- Transaction accounting mappings, including debit (DB) and credit (CR) accounts.
- Configure the applicable accounting information.
- Click Save.
Save the Plan
After configuring the plan and adding the required charges:
- Return to the Add Plan page.
- Review the plan's Basic Information and the charges added to the plan.
- Verify that the plan status is set to Active, if the plan should be available for use.
- Click Save in the upper-right corner of the Add Plan page.
Ordway saves the plan with its configured information and charges.
Comments
0 comments
Please sign in to leave a comment.