Usage records are associated with billing schedule lines based on their usage dates. You can submit multiple usage records for a billing schedule line as long as the line has not been invoiced.
Previously, once a billing schedule line was invoiced, Ordway did not allow additional usage records to be associated with it. You had to manually create another billing schedule line for the same period before submitting additional usage.
When the feature is enabled, Ordway automatically creates an additional billing schedule line when you submit usage for an already-invoiced period. The additional usage is associated with the new line and processed in the next scheduled billing run.
The original invoice remains unchanged.
Contents
- Prerequisites
- How Ordway Handles Late Usage
- How Late Usage Is Priced
- How Included Units and Prepayments Are Applied
- How Late Usage Appears in Billing Schedules and Invoices
- Submitting Additional Late Usage
Prerequisites
Before submitting usage records after invoicing:
- The subscription must have a usage-based charge.
- The Addition of Usages Post invoicing setting must be enabled for your company
- Contact Ordway support team to enable this feature
This feature also works with existing subscriptions and contracts. You do not need to create a new subscription or contract to use it.
If the setting is disabled, Ordway rejects usage submitted for a fully invoiced billing period and displays an error. No additional billing schedule line is created.
How Ordway Handles Late Usage
Ordway associates submitted usage records with billing schedule lines based on the subscription, charge, and billing period.
The behavior depends on the invoice status of the matching billing schedule line.
When the Billing Schedule Line Is Not Invoiced
If the billing schedule line has not been invoiced (Invoice = No), Ordway associates the new usage records with the existing line.
Multiple usage records can be added to the same line. The line quantity and amount are updated based on the additional usage.
Ordway does not create another billing schedule line.
When the Billing Schedule Line Is Already Invoiced
If the matching billing schedule line has been invoiced (Invoice = Yes), Ordway creates an additional open billing schedule line for the same subscription, charge, and billing period.
The process works as follows:
- Ordway identifies that the original billing schedule line has already been invoiced.
- Ordway creates an additional billing schedule line for the same billing period.
- The newly submitted usage records are associated with the additional line.
- The additional line is included in the next scheduled billing run.
The additional line is separate from the original invoiced line. Ordway does not reopen or modify the original invoice.
How Late Usage Is Priced
Ordway calculates the amount for late usage based on the charge's pricing model. The calculation also accounts for the quantity and amount already invoiced.
Per-Unit Pricing
For per-unit pricing, Ordway calculates the amount using the additional usage quantity and the applicable unit rate.
Example: A charge has a unit rate of $2.00.
- Original invoiced quantity: 10 units
- Additional usage: 4 units
- Unit rate: $2.00
The additional billing line is calculated as follows:
4 × $2.00 = $8.00
The original 10 units are not charged again.
Tiered Pricing
For tiered pricing, Ordway uses the original invoiced quantity as the baseline and evaluates the cumulative quantity to determine the applicable pricing tiers. Only the additional usage is priced on the new billing schedule line.
Example: A charge uses the following tiered pricing:
| Quantity range | Unit price |
| 1–50 units | $10.00 |
| 51–100 units | $8.00 |
| 101 units and above | $5.00 |
The original invoice includes 40 units. Another 30 units are submitted after invoicing.
- Original invoiced quantity: 40 units
- Additional usage: 30 units
- Cumulative quantity: 70 units
The additional usage is calculated as follows:
| Additional units | Unit price | Amount |
| Units 41–50 (10 units) | $10.00 | $100.00 |
| Units 51–70 (20 units) | $8.00 | $160.00 |
| Total | $260.00 |
The additional billing line is charged $260.00. The original 40 units are not charged again.
Volume Pricing
For volume pricing, Ordway evaluates the full cumulative quantity to determine the applicable volume rate. It then subtracts the amount already invoiced to calculate the additional amount.
Example 1: Additional usage crosses a volume pricing threshold
A charge uses the following volume pricing:
| Quantity range | Unit price |
| 1–50 units | $10.00 |
| 51–100 units | $8.00 |
The original invoice includes 40 units at $10.00 per unit.
Another 20 units are submitted after invoicing.
- Original invoiced quantity: 40 units
- Original invoiced amount: $400.00
- Additional usage: 20 units
- Cumulative quantity: 60 units
- Volume price for 60 units: $8.00 per unit
Ordway calculates the cumulative amount and subtracts the amount already invoiced:
- Cumulative amount: 60 × $8.00 = $480.00
- Previously invoiced amount: $400.00
- Additional amount: $480.00 − $400.00 = $80.00
The additional billing line is charged $80.00.
Example 2: Additional usage remains within the same volume tier
Using the same volume pricing:
- Original invoiced quantity: 20 units
- Original invoiced amount: $200.00
- Additional usage: 10 units
- Cumulative quantity: 30 units
The cumulative quantity remains within the first volume tier.
- Cumulative amount: 30 × $10.00 = $300.00
- Previously invoiced amount: $200.00
- Additional amount: $300.00 − $200.00 = $100.00
The additional billing line is charged $100.00.
How Included Units and Prepayments Are Applied
Ordway accounts for remaining included units and prepayment balances when calculating additional usage charges.
Included Units
The additional billing schedule line uses the included units remaining after the original billing line has consumed its share.
Example 1: Some included units remain
A subscription includes 100 units for the billing period.
- Original invoiced usage: 80 units
- Included units: 100 units
- Remaining included units: 20
- Additional usage: 35 units
- Overage rate: $1.00 per unit
Ordway applies the remaining 20 included units to the additional usage. The remaining 15 units are billed at the overage rate.
15 × $1.00 = $15.00
Example 2: All included units have been consumed
A subscription includes 100 units for the billing period.
- Original invoiced usage: 120 units
- Included units consumed: 100
- Original overage: 20 units
- Remaining included units: 0
- Additional usage: 10 units
- Overage rate: $1.00 per unit
Because no included units remain, all 10 additional units are billed at the overage rate.
10 × $1.00 = $10.00
Prepayment Balances
For charges with prepayment units or balances, Ordway applies the remaining available prepayment balance to late usage. The additional billing line does not reuse the amount already consumed by the original billing line.
Example 1: Sufficient prepayment balance remains
A subscription has an active prepayment deposit of $500.00.
- Original billing line consumption: $200.00
- Remaining prepayment balance: $300.00
- Additional usage amount: $100.00
Ordway applies $100.00 from the remaining prepayment balance.
The new remaining balance is $200.00.
Example 2: Prepayment balance is exhausted
The original billing line has consumed the entire prepayment balance.
- Remaining prepayment balance: $0.00
- Additional usage amount: $50.00
Ordway does not deduct anything from the exhausted balance. The remaining amount due is $50.00.
How Late Usage Appears in Billing Schedules and Invoices
Additional billing schedule lines follow the standard billing run process.
Billing Schedule
In the Billing Schedule view, an additional line created for late usage is identified by:
- A late-usage indicator.
- A line name suffix of (Late Usage).
- A tooltip identifying the original billing period.
The line represents the additional usage for the original period.
Invoice Generation
Ordway includes open late-usage billing schedule lines in the next scheduled billing run.
For example, if additional usage is submitted for November after the November billing schedule line has been invoiced, the open late-usage line can be picked up in the next scheduled billing run.
The resulting invoice:
- Is separate from the original invoice.
- Includes the additional usage amount.
- Displays a late-usage indicator and the original service period reference.
For example, the invoice line can identify the service period as Nov 1–Nov 30 (Late Usage).
After the additional line is invoiced, it is marked as invoiced. Its late-usage indicator and period details remain visible.
Revenue Schedule Updates
When late usage updates the billing schedule, Ordway also updates the associated revenue schedule to reflect the billing schedule changes.
Submitting Additional Late Usage
Ordway reuses an existing open late-usage billing schedule line when additional usage is submitted for the same subscription, charge, and period.
It updates the existing line rather than creating another open line.
Example
- The original billing schedule line is invoiced with 20 units.
- An additional 30 units are submitted. Ordway creates an open late-usage billing schedule line with 30 units.
- Another 20 units are submitted for the same period while the additional line is still open.
- Ordway updates the existing line to include 50 additional units and recalculates the amount.
If the late-usage billing schedule line has already been invoiced, subsequent usage submitted for the same period creates a new open late-usage billing schedule line. The previously invoiced line remains unchanged.
If Addition of Usages Post invoicing is turned off after an additional line has been created, that existing line remains intact. However, new late usage submissions are rejected while the setting remains disabled.
Comments
0 comments
Please sign in to leave a comment.